Gentlemen,
What was the difference between the German MG 34 and the MG 42?
German machine guns
- frontkampfer
- Member
- Posts: 249
- Joined: Thu May 10, 2007 2:35 am
- Location: Phillipsburg, NJ - USA
Re: German machine guns
MG 42 was made up of stampings with much less machining & looser tolerances. It had a huge rate of fire. Both were very good!
"I will not have my ship shot out from under my ass!"
- marcelo_malara
- Senior Member
- Posts: 1848
- Joined: Sun Oct 02, 2005 11:14 pm
- Location: buenos aires
Re: German machine guns
A little late for answering! The mechanisms are different. The MG-34 has a turning bolt, that locks to the barrel extension with a quarter turn, D4 is the rotating part.
The MG-42 has a lug locking system, the two cylindrical pieces (one of them has a 2 stamped) are pushed to a recess on the barrel extension for locking;
Barrel changing is simplified too. In the MG-34:
This is how this was made in the MG-42:
The MG-42 has a lug locking system, the two cylindrical pieces (one of them has a 2 stamped) are pushed to a recess on the barrel extension for locking;
Barrel changing is simplified too. In the MG-34:
This is how this was made in the MG-42:
-
- Senior Member
- Posts: 1656
- Joined: Sun Mar 06, 2011 1:06 am
Re: German machine guns
..... And the MG42 design still proudly soldiers on in the 21st century.
Byron
Byron