Angled Torpedo Tubes on German TBs & DDs

From the birth of the Dreadnought to the period immediately after the end of World War I.
Byron Angel
Senior Member
Posts: 1651
Joined: Sun Mar 06, 2011 1:06 am

Angled Torpedo Tubes on German TBs & DDs

Post by Byron Angel »

Can anyone explain why the centerline rotating twin torpedo tube mounts of German WW1 era TBs and DDs had the individual launch tubes horizontally splayed out with an angle (about 10deg?) between them?


B
User avatar
RF
Senior Member
Posts: 7759
Joined: Wed Sep 20, 2006 1:15 pm
Location: Wolverhampton, ENGLAND

Re: Angled Torpedo Tubes on German TBs & DDs

Post by RF »

I'm not sure I understand this question, this ten degree angle, is it for torpedo spreads at short ranged targets?
''Give me a Ping and one Ping only'' - Sean Connery.
mike1880
Member
Posts: 71
Joined: Sun Apr 24, 2005 9:00 pm
Location: UK

Re: Angled Torpedo Tubes on German TBs & DDs

Post by mike1880 »

Er...that IS the question. The Germans angled the tubes. Why?

Mike
User avatar
tommy303
Senior Member
Posts: 1528
Joined: Mon Oct 18, 2004 4:19 pm
Location: Arizona
Contact:

Re: Angled Torpedo Tubes on German TBs & DDs

Post by tommy303 »

Then angle was primarily to insure the torpedo would not get run over by the boat itself after launch when the boat was at speed--it does take a finite amount of time for the torpedo to accelerate to its set speed. US Elco and British Vosper PT boats also had angled launch tubes. The intended course for the torpedo was set into it by the depth, speed and gyro angle mechanism on the torpedo tube, same as on a submarine.

Their shoulders held the sky suspended;
They stood and Earth's foundations stay;
What God abandoned these defended;
And saved the sum of things for pay.
mike1880
Member
Posts: 71
Joined: Sun Apr 24, 2005 9:00 pm
Location: UK

Re: Angled Torpedo Tubes on German TBs & DDs

Post by mike1880 »

No, that's not it. He's asking about the centreline twin mounts.

Mike
User avatar
tommy303
Senior Member
Posts: 1528
Joined: Mon Oct 18, 2004 4:19 pm
Location: Arizona
Contact:

Re: Angled Torpedo Tubes on German TBs & DDs

Post by tommy303 »

Actually for the WW1 torpedo boats, the answer is still pretty much the same. The attack was normally conducted using either the port or starboard torpedo tubes, i.e., the forward ones with only limited traverse on each side of the hull and the right or left pair from the angled midships mounts. The torpedo boat would approach the target at an angle so as to show as little of its hull as possible, and once in range would fire the first salvo of torpedoes. The angled midship torpedo mounts facilitated this and required only a little traverse to train one of the torpedo tubes off the port or or starboard bow as the case may be. The torpedo boat would then either turn away rapidly under smoke screen or alter course enough to bring the unfired tubes from the other bow to bear and train the center tubes mount over onto the proper bearing so that its unfired torpedo tube was aimed along the same line of sight as the forward tube.

Their shoulders held the sky suspended;
They stood and Earth's foundations stay;
What God abandoned these defended;
And saved the sum of things for pay.
User avatar
tommy303
Senior Member
Posts: 1528
Joined: Mon Oct 18, 2004 4:19 pm
Location: Arizona
Contact:

Re: Angled Torpedo Tubes on German TBs & DDs

Post by tommy303 »

the right or left pair from the angled midships mounts
I meant to write, 'the right or left tube from the paired, angled midships mounts.'

Their shoulders held the sky suspended;
They stood and Earth's foundations stay;
What God abandoned these defended;
And saved the sum of things for pay.
Post Reply