Prinz Eugen's hull

General naval discussions that don't fit within any specific time period or cover several issues.
ocy9
Junior Member
Posts: 2
Joined: Tue Dec 24, 2013 5:19 am

Prinz Eugen's hull

Post by ocy9 » Mon Jan 13, 2020 5:39 pm

I'm doing some research on the WW2 German cruiser Prinz Eugen for a 3D modelling project. Would anyone here happen to know if there were any significant changes made to Prinz Eugen's hull during her career (from launch to allied capture)? I want to reflect these changes accurately in the 3D models I'm producing of this ship.

What I know so far is:
  • After launch, before commissioning, an Atlantic/clipper style bow was installed.
  • At some point during her career, the stern was torpedoed and had to be rebuilt. Was the stern rebuilt to the same specifications and dimensions, or did they redesign it at this time?

User avatar
Dave Saxton
Supporter
Posts: 3093
Joined: Sat Nov 27, 2004 9:02 pm
Location: Rocky Mountains USA

Re: Prinz Eugen's hull

Post by Dave Saxton » Thu Jan 16, 2020 4:34 pm

PG was torpedoed in Norwegian waters. Before returning to Germany the collapsed stern was removed and a transverse bulkhead installed, essentially converting the stern to a transom stern. The ship returned to Germany under its own power and steerage using the temporary transom stern.

A new stern of the original design had been prefabricated at Kiel. After the ship was dry docked and the aft section prepared, the prefabricated stern was flown in to place by a crane. It was then welded on.
Entering a night sea battle is an awesome business.The enveloping darkness, hiding the enemy's.. seems a living thing, malignant and oppressive.Swishing water at the bow and stern mark an inexorable advance toward an unknown destiny.

ocy9
Junior Member
Posts: 2
Joined: Tue Dec 24, 2013 5:19 am

Re: Prinz Eugen's hull

Post by ocy9 » Wed Jan 29, 2020 3:48 am

Ok, so the replacement stern was externally identical to the original stern.

With that settled, is anyone aware of any other changes to the ship's hull throughout it's service (apart from the "Atlantic bow")?

User avatar
Herr Nilsson
Senior Member
Posts: 1445
Joined: Thu Oct 21, 2004 11:19 am
Location: Germany

Re: Prinz Eugen's hull

Post by Herr Nilsson » Wed Feb 12, 2020 12:13 pm

AFAIK bilge keels were added and cool water intakes were modified (bigger?).
Regards

Marc

"Thank God we blow up and sink more easily." (unknown officer from HMS Norfolk)

Post Reply